CLEANLINE ECO FLOOR MAINTAINER 5L

5L Cleanline eco floor maintainer.

A concentrated cleaner and maintainer for spray buffing, mopping and scrubber drying of all water-resistant hard floors.

•  Effective at removing scuff marks and extends the life of a polished floor.
•  Repairs and re-coats surfaces leaving a protective slip-resistant finish.
•  pH neutral formula is safe for use on all hard floor surfaces including marble, stone and wood.
•  Solvent-free floor maintainer and contains no phosphates.
•  Leaves a fresh cologne fragrance.
•  Ideal for use in scrubber driers machines. Low foaming for fast solution pickup and optimal recovery tank use.
•  Suitable for floors previously treated with emulsion floor polish.
•  Use with T15 Floor cleaner/maintainer labelled trigger bottle for spray cleaning/burnishing applications.

This product replaces an equivalent Jangro product - Comax Stock Code: EFM-UN

Recommended Dilution
Dilute according to task and soiling level.

General hard floor/machine cleaning:
Dilute up to 1 in 20 parts
Add 50ml per 1 litre of warm water.

Spray cleaning/burnishing:
Dilute up to 1 in 10 parts

T15 Trigger spray bottle:
Add 100ml to 600ml of water.

ENSURE YOU ARE WEARING RECOMMENDED PERSONAL PROTECTIVE EQUIPMENT (PPE) AND HAVE THE CORRECT EQUIPMENT FOR THIS TASK.

Directions for Use
Damp Mopping:
Make sure hard floors are swept and free from loose debris.
Apply the solution with a mop and walking backwards mop in an “S” shape pattern.
Allow contact time but do not allow the solution to dry.
Remove the soiled solution and rinse the surface with clean water.
Allow to air dry.
Burnish to a shine with a nylon polishing pad.

Spray Cleaning/Burnishing:
Always clean the surface with a mild detergent prior to application of floor maintainer.
Trigger bottle spray solution directly to the floor surface slightly ahead of the rotary floor machine.
Immediately burnish lightly until dry.
Do not attempt to spray buff very dirty floors, these should be mopped or scrubbed with a mild detergent prior to application.

IMPORTANT: DO NOT USE ON UNSEALED WOOD OR CORK FLOORS.

DO NOT OVER APPLY SOLUTION TO SURFACE.

DO NOT ATTEMPT TO SPRAY BUFF DIRTY FLOORS.