CLEANLINE FLOOR MAINTAINER 5L

5L Cleanline floor maintainer.

Repairs and re-coat hard floor surfaces leaving a protective slip resistant finish and fresh cologne fragrance.

•  Highly efficient floor maintainer designed to clean and maintain gloss and polished floor surfaces.
•  Suitable for floors previously coated with a metallised floor polish.
•  Will remove scuff marks with ease and bu?able for extra gloss finish.
•  Repairs and re-coats hard floor surfaces leaving a protective slip resistant finish.
•  Designed for routine spray buffing, mopping and use with a scrubber drying machine.
•  Low foaming formula for fast solution pick-up and optimal recovery tank use.

For use with Cleanline T15 trigger bottles under code CL9015 (trigger head sold separately under THWHI)

This product replaces an equivalent Jangro product - Comax Stock Code: FPC5

Recommended Dilution
Dilute accordingly to task and soiling level.

General use/soiling: Dilute 1:20 Add 2 doses (50ml) per 1 litre of warm water.

Heavy duty floor soiling: Dilute 1:10 Add 4 doses (100ml) per 1 litre of warm water.

Spray cleaning/burnishing: Dilute 1:10

T15 Trigger spray bottle: Add 2 doses (50ml) to 600ml of water.

ENSURE YOU ARE WEARING RECOMMENDED PERSONAL PROTECTIVE EQUIPMENT (PPE) AND HAVE THE CORRECT EQUIPMENT FOR THIS TASK.

Directions for Use
Floor Maintaining:
Remove any obstructions from the area and display appropriate signage before cleaning.
Make sure hard floors are swept and free from loose debris.
Apply the solution with a mop and walking backwards mop in an “S” shape pattern.
Allow contact time but do not allow the solution to dry.
Remove the soiled solution and rinse the surface with clean water.
Allow to air dry.
Burnish to a shine with a nylon polishing pad.

Spray Burnishing:
Always clean the surface with a mild detergent prior to application of floor maintainer.
Trigger bottle spray solution directly to the floor surface slightly ahead of the rotary floor machine. Immediately burnish lightly until dry.

TOP TIP: ALWAYS WORK FROM THE BACK TO THE FRONT OF THE ROOM WHEN CLEANING FLOORS

IMPORTANT: DO NOT USE ON UNSEALED WOOD OR CORK FLOORS.

DO NOT OVER APPLY SOLUTION TO SURFACE. DO NOT ATTEMPT TO SPRAY BUFF DIRTY FLOORS.